Overview

  • Proudly Designed and Made in USA
  • Low Profile P.O.I Rings Have a 0.98 in or 25 mm Center Height to Fit Optics with a 30 mm Tube, for up to a 49 mm Outer Objective
  • Medium Profile P.O.I® (Precision Optics Interface) Rings Have a 30mm Center Height to Fit Optics with a 30mm Tube and up to a 59mm Outer Objective
  • High Profile P.O.I Rings Have a 1.46 in or 37 mm Center Height to Fit Optics with a 30 mm Tube, for up to a 73 mm Outer Objective
  • The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -  
    • a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction 
    • b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold 
    • c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
  • 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws and Designed with a 22mm Ring Width
  • Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
  • Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
  • UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size

Specifications

BrandUTG
Tube Size30mm
Mounting Interface (Optics)Picatinny

Reviews