If you neck size fire-formed brass, you know the pattern: after enough firings the cases start getting harder to chamber. This body die is the fix. It full-length resizes the case body and bumps the shoulder back so the case chambers properly again, without disturbing the case neck, so the neck stays as your neck sizing die left it.

Be clear on what it is and what it isn't. A body die is made without internal parts: there is no decapping rod and no expander. It does not deprime and it does not size the neck, so it is not a full-length die set and does not replace one. You use it alongside your neck sizing die, and only bring it out when cases have become difficult to chamber after repeated firing and neck sizing.

That makes it a good fit if you want to keep neck sizing and only work the body when you need to, rather than full-length sizing the whole case every time. Redding makes this die for the 7mm-08 Remington Ackley Improved 40°, a .284/7mm case with a 40° shoulder.

Features

  • Restores easy chambering to cases neck sized over repeated firings
  • Resizes the case body and bumps the shoulder back
  • Leaves the case neck exactly as your neck die sized it
  • No internal parts, so no decapping rod or expander
  • Use alongside neck sizing, not as a full-length die set
  • Made for 7mm-08 Remington Ackley Improved 40° cases
  • Restores easy chambering to cases neck sized over repeated firings
  • Resizes the case body and bumps the shoulder back
  • Leaves the case neck exactly as your neck die sized it
  • No internal parts, so no decapping rod or expander
  • Use alongside neck sizing, not as a full-length die set
  • Made for 7mm-08 Remington Ackley Improved 40° cases
SKU RED75430
Model # 75430
Brand Redding
Cartridge 7mm-08 Remington Ackley Improved 40°

Be The First To Review This Product!

Help other Scoped Out users shop smarter by writing reviews for products you have purchased.

Write a product review