This mount has a bottom radius of .670". There should be a slight gap at the top of the radius between the receiver and the mount when mounted. The two spreads on this mount measure .500"-.505" and .8625" which should fit the receiver ring on the following guns:

Common Applications:

Shotgun:
Mossberg 500, 590, 835, 930, 935 Pre '97
Mossberg 500, 590, 835, 930, 935 Late (after '97) (Requires 8-40 and Longer Screws)
Benelli Auto / Super Black Eagle / Vinchi, M2 (Will Work in the Front Set Only, 8-40 Screws)
Benelli Supernova (Will Work in the Front Set Only, 8-40 AND Longer Screws)
Browning A-Bolt 12 Gauge
Franchi Affinity
Savage 210
Savage 212
Savage 220
Stoeger M3000 / Stoeger M3500 (Will Work in the Front Set Only, 8-40 Screws)
Winchester 1300
Winchester SXP


Rifle:
Remington 700, 722, 40x 
Remington 783 
Remington 710/770 
Remington xp 100 
Remington 4, 6, 7400, 7615 (Front Set Only, 8-40 Screws)
Savage Arms Centerfire Models 
Winchester 70

The Winchester SX4 requires 8-36 x 3/8 screws which are not provided with this mount.

This base is able to be used on applications that use a Weaver #19 base.

Red Dot Fitment: 
Vortex Defender-CCW 3 MOA Red Dot Sight
Vortex Defender-CCW 6 MOA Red Dot Sight
Bushnell RXS-100 Requires 6-32 x 3/8" SHCS
Bushnell RXC-200 Requires 6-32 x 3/8" SHCS
Bushnell RXU-200 Requires 6-32 x 3/8" Flat Head Screws
Bushnell RXS-250 Requires 6-32 x 3/8" SHCS
Crimson Trace CTS-1500
Holosun 407K*
Holosun 507K*
Holosun EPS-GR*
Holosun EPS-RD*
Holosun EPS-Carry-GR*
Holosun EPS-Carry-RD*
Jpoint
Leupold Delta Point Pro
Optima
Redfield Accelerator
Shield RMS
Shield RMSc
Shield SMS
Sig Romeo Zero
(*with Modification, the rear two locater pins on the plate must be filed off in order to allow the 407K/507K/EPS Models to fit.)

SKU EGW49426
Model # 49426
Brand EGW
Red Dot Mount Footprint Leupold Deltapoint Pro

Be The First To Review This Product!

Help other Scoped Out users shop smarter by writing reviews for products you have purchased.

Write a product review