Pulsar Forward FN455S Digital NV Attachment

Digital Night Vision Scope Attachment

$1,922.00
RRP $2,450.00
SAVE $528.00 (22%)
Supplier Direct

Secure yours with a deposit of $960

Qualifies for Free Freight

The Pulsar Forward FN455S is designed to fit on the front of your normal daytime scope and turn it into a night vision scope.


Please expect a 1-2 month wait from time of order.


The Pulsar Forward FN455S is designed to fit on the front of your normal daytime scope and turn it into a night vision scope. One of the huge advantages of the Pulsar FN455S is the very sensitive sensor, this allows it to work in low light without an illuminator and when the illuminator is used it is in a covert wavelength.

The Pulsar FN455S does not require you to zero as it fits in a single axis in front of your existing riflescope. It attaches to the objective end of your rifle scope via adaptors and can be quickly attached and detached via a four point bayonet mount. There are various adapters to suit different size objectives. The FN455S is supplied with the monocular attachment in the kit.

A very handy night vision scope attachment for those who share between different rifles, or those with only one rifle and want to have a day scope and night vision.


Included in the Box:
  • Digital Module
  • Pulsar 5X30 Monocular
  • Carrying Case
  • Battery Pack
  • Battery Charger
  • Mains Adaptor
  • Micro USB Cable
  • Quick Start Guide
  • Lens Cloth
  • Warranty Card

Enhanced nighttime sensitivity

The Forward FN455S uses proprietary software, cutting-edge electronic components and signal-processing algorithms to deliver one of the industry’s highest values of sensitivity in infrared spectrum (nighttime sensitivity). The result is a device offering flawless passive-mode performance in deep twilight, even night, without switching on IR illumination. High sensitivity in the range of 900-950nm makes it possible to use the Forward FN455S with invisible IR Illuminators.

 

 

Over 500m nighttime viewing range

High nighttime sensitivity, high resolution display and sensor, wide selection of brightness and contrast settings, quality optics and a powerful built-in IR Illuminator for operation in total darkness make the Forward FN455S the perfect tool for detecting large quarry at distances of 450-500 meters.

 

 

Easy transformation of an day scope or binoculars into a night vision device

To install the Forward FN onto the front optical bell of a daylight spotting scope or binoculars, adapters of various mounting size are used. The adapter permanently attaches to the scope’s bell. This allows quick installation of the Forward FN attachment in front of the lens for nighttime observation. When the attachment is not used, the adapter accommodates a protective cap to protect the spotting scope lens in the daytime.

 

 

“Invisible” IR illuminator with 700 mW power with adjustable light spot position

A new Pulsar Ultra-X940S removable IR illuminator emits 940 nm in the “invisible” range. The power level of the IR illuminator varies between 175, 350 and 700 mW depending on the required illumination intensity for the particular type of observation. The optical part of the illuminator provides flexible adjustment of the light flux direction for full and uniform illumination of the observation area.

 

 

Integrated video and sound recorder

Capturing still images and video is seamless with the Forward FN’s built-in video recorder. High quality videos will also record sound so you can capture your full experience whilst using the device.  Image and video content is stored internally and can easily be transferred to PC/laptop via wired connection or wirelessly to your smartphone or tablet with the iOS and Android compatible Stream Vision App.

 

 

Quick-change long-life rechargeable battery backs

Forward FN uses an advanced self-contained autonomous B-Pack power supply system. The rechargeable battery IPS7 (6.5 Ah) fits into a special slot in the device’s body without protruding and delivers over 7 hrs. of operation from a single charge in the maximum consumption mode. Higher-powered IPS10 (10Ah) and IPS14 (13.2Ah) Battery Packs are also optionally available. Quick-release and wireless design, long operating time are the major highlights of this power system.

 

 

Wi-Fi. Integration with IOS and Android devices

The built-in WiFi module connects the device with either Android or iOS smartphones using the Stream Vision 2 mobile app. This combination opens up a wide range of options: wireless device software updates, real-time image transmission to the mobile device screen, remote control digital functions and much more. Users registered in the application are provided with cloud storage space for photos and videos taken with a digital or thermal imaging device. An important feature is that the device is still compatible with the previous, first version of the Stream Vision application.

 

More features

 

HD-sensor

The highly sensitive CMOS sensor featuring 1280х720 HD resolution delivers a high definition image with precise detail rendering.

 

Easy control with wireless remote operating panel

The ergonomic, Pulsar BT wireless remote operating panel, with encoder wheel, puts the full range of device's capabilities at your fingertips for comfortable, convenient, hands-off operation. . With the Pulsar BT, the hunter only needs to make minimal movements to control the digital attachment features and can concentrate on hunting.

 

Instant start-up

Forward FN starts up within three seconds after ON button is pressed.

 

Fully waterproof IPX7

The Forward FN is fully waterproof featuring an IPX7 level of protection. The device is able to operate in precipitation of any intensity and survive a short-term submersion.

 

Software sensitivity enhancement algorithm SumLight

SumLight function increases sensor sensitivity, which allows passive observation (with IR off) in low light at night. The software automatically activates algorithms, such as summing adjacent pixel signals, frame addition, thus increasing sensitivity while preserving sufficient image quality.

 

Updatable Software

A smartphone, free mobile application Stream Vision 2 and Internet access is all one needs to check updates and to install new firmware. This allows a hunter to receive new features and bug fixes for a Forward FN he/she already owns.

 

Operating Temperatures from -25 to +50°C

Forward FN is effective in use at low temperatures (down to -25°C). The frost-resistant AMOLED display features quick response rate and ensures a crisp image when viewing fast moving objects.

 

Four point quick bayonet mount system with secure clamp

The Forward FN docks the proprietary adapter with the durable four-point bayonet assembly. Pulsar line includes three models of adapters to mount on scopes with a lens diameter of 40; 42; 50; 56mm.

SKU PUL78199
Model # 78199
Brand Pulsar
Product Line Forward
Type of Optic Digital Night Vision
Length 155mm
Weight 1030grams
IR Wavelength 940m
Type Night Optics
Sub Type NV Scope

The package content of Pulsar¨ optoelectronical devices includes a warranty card. The warranty card confirms that the Pulsar¨ product you purchased was supplied without defects and is fully operational. It guarantees the repair of manufacturer defects during the warranty period provided, if the item has been used in accordance with the user manual. The Manufacturer warrants its products against defects in materials and workmanship for a period of three years from the moment of initial purchase or from the manufacturing date if there is no receipt to prove purchase.To avoid any problems, we recommend becoming familiar with the device's user manual.

The warranty does not cover any external damage to the device, its casing or adjustable parts' movements (i.e. smooth movement or rough movement). The manufacturer has the right to render the warranty null and void in the following cases:

- if the device has been modified or tampered with,
- if the device has been dropped or has marks of mechanical or chemical
damage,
- if the device has been tampered with by unauthorized repair,
- if the device has been damaged as a result of fire or natural disasters,
- if the device has been damaged as a result of liquids or other substances getting inside,
- if the serial number of the device has been modified, rubbed off, removed or is illegible, or has been programmatically deleted (for devices with unique serial number).

In the event of activating the warranty repair service, please contact the distributor where the device was purchased or contact the national distributor Pulsar¨ in your country.

Any product returned under warranty should be packaged in a sturdy, outside shipping carton, to prevent damage in transit.
In addition, it must be accompanied with the following items:

1. Letter with the detailed description of the arisen problem and indicating error conditions.
2. Copy of the original receipt showing when and where the product was purchased.
3. Return Shipping Information, including return address and contact person.
4. Warranty Card filled in by the seller.

Please contact our service centre with any questions you might have at e-mail: support@pulsar-vision.com.

Please note:
The period of time during which the company provides repair service for the products on the market is five years from the day of sale or if it's impossible to define, from the date of production.
During this period the manufacturer provides both warranty and non-warranty service for your product.
The warranty period for rechargeable batteries/units (including those included into the package) is one year.


Be The First To Review This Product!

Help other Scoped Out users shop smarter by writing reviews for products you have purchased.

Write a product review


We Also Recommend



Others Also Bought



More From This Category